Fernando, W. T. R. S.Amaraweera, T. H. N. G.Wijesundera, R. P.Wijayasinghe, H. W. M. A. C.2024-10-292024-10-292024-11-01Proceedings of the Postgraduate Institute of Science Research Congress (RESCON) - 2024, University of Peradeniya, P 1863051-4622https://ir.lib.pdn.ac.lk/handle/20.500.14444/2770Cu₂O has gained attention for the anode application of the rechargeable Lithium-Ion Battery (LIB) than the other competing materials due to its high theoretical capacity (375.0 mAh/g), good capacity retention, affordability, non-toxicity and ease of storage. The crystallinity, morphology and interfacial properties between the current collector/anode and anode/electrolyte are crucial for the electrochemical performance of Cu₂O electrodes. The aforementioned properties can be optimized by the synthesis method. A simple, low-cost, and convenient electrodeposition technique, which is a promising technique that enhances crystallinity with favourable morphology and interfacial properties for electrode materials, has not been studied. This study aimed to investigate the possibility of using p-Cu₂O and n-Cu₂O anode materials for LIBs synthesized by the electrodeposition technique. The favourable morphology of synthesized p-Cu₂O and n-Cu₂O enhanced the contact area of the active materials with the electrolyte, facilitating Li ion diffusion. Mott-Schottky plots confirmed the formation of p-type and n-type conductivity in Cu₂O with dopant densities of 2.0685 × 1017 cm⁻³ and 2.9692× 1017 cm⁻³, respectively. The electron densities are more crucial for the conversion mechanism reaction during the charging and discharging process. Therefore, n-Cu₂O attributes better conversion mechanism reactions than p-Cu₂O. Current-voltage characterizations of p-Cu₂O and n-Cu₂O electrodes confirmed the Ohmic contact in between the anode and current collector. The p-Cu₂O and n-Cu₂O electrodes exhibited a high initial specific discharge capacities of 533.0 mAh/g and 623.9 mAh/g at a rate of C/5, respectively. The electrodes showed a specific discharge capacities of 143.2 mAh/g and 203.4 mAh/g with Coulombic efficiencies of 99.9% and 98.7% after 50 cycles for p-Cu₂O and n-Cu₂O, respectively. Altogether, this study revealed that n-Cu2O has better electrochemical performance than p-Cu₂O. Hence, n-Cu₂O has a potential for the anode application in next-generation high-performance LIBs.enAnode materialsElectrodepositionLi-ion batteryn-Cu2Op-Cu2OArticle