Gunarathna, W.D.S.N.Sumithrarachchi, C.S.Lamabadusuriya, M.R.2026-06-302026-06-302022-10-28Proceedings of the Postgraduate Institute of Science Research Congress (RESCON) -2022, University of Peradeniya, P 177978-955-8787-09-0https://ir.lib.pdn.ac.lk/handle/20.500.14444/7847In many nuclear decay processes, two or more simultaneous or successive radioactive emissions occur. The angular correlation of these events carries information that a single detection method cannot acquire. Coincidence methods are employed to detect these events and utilized in applications such as Positron Emission Tomography (PET) to produce functional and static images by acquiring position information. This study is focused on building proper instrumentation to assess a cost-effective method to characterize positron emitters that can be developed as PET-radiotracers in Sri Lanka. As the initial approach, the angular distribution of positron annihilation was obtained using ⁶⁴Cu. The thermal neutron activation was used to produce ⁶⁴Cu from a CuSO₄.5H₂O sample. Two NaI (Tl) scintillation detectors have been used to build a delayed coincidence system coupled to scalar counters by applying energy windows using single- channel analyzers. The well-known angular distribution of ⁶⁰Co with the theoretical angular correlation coefficients has been used to validate experimental results and to optimize input delay time and source-to- detector distance. A standard ²²Na source was used to determine the coincidence efficiency of the experimental setup, which was then used to quantify ⁶⁴Cu in the sample. The experimentally acquired angular distribution correlation function and coefficients for ⁶⁰Co show an agreement with the theoretical data. The efficiency of the coincidence setup was measured as 0.18% for 511 KeV positron annihilation gamma emission. The activity concentration of neutron-activated ⁶⁴Cu has been quantified as 136.8 Bq/g. The angular distribution of 64Cu and ²²Na was compared with each other. Hence, it can be concluded with this setup; it is possible to evaluate positron emitters produced in Sri Lanka cost-effectively at the production site as the initial approach prior to the direct testing with PET scanners which need higher expenses.en-USAnnihilationCoincidence64CuPETPositronArticle