Utilization of conducting polymers as sensitizers in solid-state photocells
| dc.contributor.author | Pathirathne, T. | |
| dc.date.accessioned | 2024-10-21T05:42:22Z | |
| dc.date.available | 2024-10-21T05:42:22Z | |
| dc.date.issued | 2006 | |
| dc.description.abstract | Substituted thiophene sensitized, nanocrystalline TiO₂-based quasi solid- state solar cells were fabricated by using either poly (3-thiophene acetic acid) (P3TAA) or a copolymer with poly (3-thiophene acetic acid)-poly(hexylthiophene) (P3TAA-PHT) and their performances were examined. The photocells were able to generate reasonably high photocurrents in the presence of hole transporting material Cul for the first time in polymer sensitized sold-state photovoltaic devices. Dramatic enhancement in the cell performances were observed with the addition of an ionic liquid 1-ethyl-3-methylimidazolium bis(trifluromethylsulfonyl) amide (EMImTf₂N) and LiTf₂N to the Cul solution as additives for charge transport promotion. The cell sensitized with P3TAA generated a short circuit photocurrent of ~1.4 mAcm⁻² with an open-circuit voltage of ~330 mV and a total power conversion efficiency of ~0.25% under the irradiance of 1000 Wm” (1.5 Air Mass). In the case of co- polymer P3TAA-PHT delivered ~0.28% efficiency under the same conditions with ~1.45 mAcm⁻² as photocurrent and ~325 mV as photovoltage. The corresponding incident photon to current conversion efficiencies (IPCE) of the above cells were ~37 % and ~31 %, respectively | |
| dc.identifier.uri | https://ir.lib.pdn.ac.lk/handle/20.500.14444/2298 | |
| dc.language.iso | en_US | |
| dc.publisher | The University of Peradeniya | |
| dc.subject | Chemical Sciences | |
| dc.title | Utilization of conducting polymers as sensitizers in solid-state photocells | |
| dc.type | Thesis |