PEDOT: PSS/GO based three electrode photo supercapacitor to harness light energy and storage

dc.contributor.authorRavindran, N.S.
dc.contributor.authorWijayarathne, W.M.K.B.N.
dc.contributor.authorBandara, T.M.W.J.
dc.date.accessioned2025-10-24T03:29:55Z
dc.date.available2025-10-24T03:29:55Z
dc.date.issued2024-08-29
dc.description.abstractThe potential use of photo-powered energy storage devices in smart electronics has attracted a lot of attention due to the emerging power crisis in the world. Therefore, a device capable of simultaneous energy harvesting and storage is crucial. This effort involved the fabrication of a photo-supercapacitor comprising three electrodes. A dye-sensitized photoanode and two graphite electrodes coated with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate and graphene oxide (PEDOT: PSS/GO) were utilized as the three electrodes. In the fabrication process of the device, a gel polymer electrolyte was integrated between a five-layer TiO₂- based photoanode and the middle electrode, as the dye-sensitized solar cell (DSSC). The middle and counter electrodes of the supercapacitor were separated by a filter paper soaked with KOH. The bifunctional middle electrode, which serves as both an electrode for the supercapacitor and a counter electrode for the DSSC to allow electrolyte regeneration, was a double-sided coated electrode based on PEDOT: PSS/GO. Also, a comparison was conducted between PEDOT: PSS/GO and PEDOT: PSS/GO/Ascorbic acid-based photo supercapacitors. Ascorbic acid was added as a dispersing as well as GO-reducing agent. Before the assembly of the hybrid device, the DSSC, and the supercapacitor were analyzed separately. The performance of the fabricated photo supercapacitor was then evaluated under a light intensity of 1000 W m⁻². The photo supercapacitor utilizing PEDOT: PSS/GO-based middle and counter electrode was able to achieve a power conversion efficiency of 1.14%, open circuit voltage (Voc) of 0.66 mV, current density (Jsc) of 4.35 mA cm⁻², a fill factor (FF) of 0.40 and a specific capacitance of 3.22 F g⁻¹. The PEDOT: PSS/GO nanocomposite optimized the electrical double layer capacitance provided by individual GO sheets and the photo capacitive contribution of redox- active PEDOT: PSS. The results show that the photo convertibility, FF, and Voc are higher in PEDOT: PSS/GO system compared to the ascorbic acid-based system.
dc.identifier.citationProceedings of the Peradeniya University International Research Sessions (iPURSE) – 2024, University of Peradeniya, P 41
dc.identifier.issn1391-4111
dc.identifier.urihttps://ir.lib.pdn.ac.lk/handle/20.500.14444/5652
dc.language.isoen_US
dc.publisherUniversity of Peradeniya, Sri Lanka
dc.subjectPhoto-Supercapacitor
dc.subjectDye-Sensitized Solar Cells
dc.subjectSymmetric Supercapacitor
dc.subjectPEDOT: PSS/GO Nanocomposite
dc.titlePEDOT: PSS/GO based three electrode photo supercapacitor to harness light energy and storage
dc.typeArticle

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Ravindran, N.S..pdf
Size:
81.94 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed to upon submission
Description:

Collections